Base

Instructions to set up your base node.

Requirements

Setup your Axelar validator
Minimum hardware requirements: 8 AWS vCPU+, 8GB RAM, 512GB of SSD free storage space.
MacOS or Ubuntu 22.04 (tested on 22.04)
Official Documentation

Prerequisites

Common Docker Compose Commands

sudo apt-get install jq -y
snap install docker

Clone Repo

git clone https://github.com/base-org/node base-node
cd base-node

Set node config

In docker-compose.yml, uncomment the right .env file according to the network you want to run it on

env_file:
# select your network here:
#      - .env.sepolia
      - .env.mainnet

env_file:
# select your network here:
      - .env.sepolia
#      - .env.mainnet

Set the following config options in base-node/.env.sepolia or base-node/.env:

# [recommended] replace with your preferred L1 (Ethereum, not Base) node RPC URL:
OP_NODE_L1_ETH_RPC=https://rpc.sepolia.org

# [required] replace with your preferred L1 CL beacon endpoint:
OP_NODE_L1_BEACON=https://your.sepolia.beacon.node/endpoint-here

You can setup a beacon endpoint using the instructions here, make sure to expose the endpoint to public In lighthouse this needs passing of --http-address 0.0.0.0 while starting the service

Start the node

docker compose up -d

This should show an output like this:

[+] Running 3/3
 ✔ Network base-node_default   Created                                                                                                                       0.1s
 ✔ Container base-node-geth-1  Started                                                                                                                       0.4s
 ✔ Container base-node-node-1  Started                                                                                                                       0.8s                                                                                                       11.2s

After it is done, verify by listing the services and their status

docker compose ps

You should see these 2 services running

NAME                          IMAGE                                                                                                 COMMAND             SERVICE             CREATED             STATUS                    PORTS
NAME                IMAGE               COMMAND                  SERVICE             CREATED             STATUS              PORTS
base-node-geth-1    base-node-geth      "bash ./geth-entrypo…"   geth                16 seconds ago      Up 15 seconds       0.0.0.0:7308->6060/tcp, :::7308->6060/tcp, 0.0.0.0:8525->8545/tcp, :::8525->8545/tcp, 0.0.0.0:8526->8546/tcp, :::8526->8546/tcp, 0.0.0.0:30308->30303/tcp, 0.0.0.0:30308->30303/udp, :::30308->30303/tcp, :::30308->30303/udp
base-node-node-1    base-node-node      "bash ./op-node-entr…"   node                16 seconds ago      Up 15 seconds       0.0.0.0:6062->6060/tcp, :::6062->6060/tcp, 0.0.0.0:7320->7300/tcp, :::7320->7300/tcp, 0.0.0.0:7445->8545/tcp, :::7445->8545/tcp, 0.0.0.0:9242->9222/tcp, 0.0.0.0:9242->9222/udp, :::9242->9222/tcp, :::9242->9222/udp

Check logs

Verify OP geth logs

docker compose  logs geth --since 20m -f

base-node-geth-1  | INFO [03-18|07:28:01.409] HTTP server started                      endpoint=[::]:8545 auth=false prefix= cors=* vhosts=*
base-node-geth-1  | INFO [03-18|07:28:01.409] WebSocket enabled                        url=ws://[::]:8546
base-node-geth-1  | INFO [03-18|07:28:01.409] WebSocket enabled                        url=ws://[::]:8551
base-node-geth-1  | INFO [03-18|07:28:01.409] HTTP server started                      endpoint=[::]:8551 auth=true  prefix= cors=localhost vhosts=*
base-node-geth-1  | INFO [03-18|07:28:11.610] Looking for peers                        peercount=0 tried=156 static=0
base-node-geth-1  | INFO [03-18|07:28:21.725] Looking for peers                        peercount=0 tried=122 static=0
base-node-geth-1  | INFO [03-18|11:32:45.773] Forkchoice requested sync to new head    number=11,986,109 hash=085c5c..61c7ca
base-node-geth-1  | INFO [03-18|11:32:47.466] Forkchoice requested sync to new head    number=11,986,110 hash=2f176f..8f3656
base-node-geth-1  | INFO [03-18|11:32:49.476] Forkchoice requested sync to new head    number=11,986,111 hash=e247cf..08c3fb
base-node-geth-1  | INFO [03-18|11:32:51.280] Forkchoice requested sync to new head    number=11,986,112 hash=b6c25a..b7a064

Verify OP node logs

docker compose  logs node --since 20m -f

You should see logs like

base-node-node-1  | t=2024-03-18T11:32:40+0000 lvl=info msg="Starting JSON-RPC server"
base-node-node-1  | t=2024-03-18T11:32:40+0000 lvl=info msg="started metrics server" addr=[::]:7300
base-node-node-1  | t=2024-03-18T11:32:40+0000 lvl=info msg="Starting execution engine driver"
base-node-node-1  | t=2024-03-18T11:32:40+0000 lvl=info msg="Starting driver" sequencerEnabled=false sequencerStopped=false
base-node-node-1  | t=2024-03-18T11:32:40+0000 lvl=info msg="Rollup node started"
base-node-node-1  | t=2024-03-18T11:32:40+0000 lvl=info msg="State loop started"
base-node-node-1  | t=2024-03-18T11:50:47+0000 lvl=info msg="Sync progress" reason="unsafe payload from sequencer while in EL sync" l2_finalized=0x0000000000000000000000000000000000000000000000000000000000000000:0 l2_safe=0x0000000000000000000000000000000000000000000000000000000000000000:0 l2_pending_safe=0x0000000000000000000000000000000000000000000000000000000000000000:0 l2_unsafe=0x6e8ea627774bbe62255b23938ea2639c251e5199cadc7eaee58412193423acfc:11986117 l2_time=1710761581 l1_derived=0x0000000000000000000000000000000000000000000000000000000000000000:0
base-node-node-1  | t=2024-03-18T11:50:49+0000 lvl=info msg="Received signed execution payload from p2p" id=0x17e27490a5845c45d656d2a464a0c9aa1c764cc286d96bc2d17a108e2cbe2737:11986651 peer=16Uiu2HAm5zCUPtJdtbGF7XLQ8fsmsgWP9656wmMTSnnp5FoDdxDD
base-node-node-1  | t=2024-03-18T11:50:49+0000 lvl=info msg="Optimistically inserting unsafe L2 execution payload to drive EL sync" id=0x17e27490a5845c45d656d2a464a0c9aa1c764cc286d96bc2d17a108e2cbe2737:11986651

Verify node sync status

RPC Endpoint

echo "$(curl -4 ifconfig.co):8545"

Method:

Check your op node status at port 7545 by

curl -X POST -H "Content-Type: application/json" --data     '{"jsonrpc":"2.0","method":"optimism_syncStatus","params":[],"id":1}' [rpc] | jq

If you get something like this in response to the above rpc call, your node is setup correctly

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": {
    "current_l1": {
      "hash": "0x24f7d66e8c80d0c6a598e9206ba1abc81264c1cc68afc14d8eca3f04fa81f921",
      "number": 323360,
      "parentHash": "0x99ce84a2d455425f0c3a68b2b83a74301810fc8c726cba384b08d9a79d9381d1",
      "timestamp": 1700059308
    },
..........
..........
    "engine_sync_target": {
      "hash": "0x7b7ed381aac9cec2a43b37c30779832cb8a82e044e38b4ada0f1c90719bd3d50",
      "number": 30955,
      "parentHash": "0x882503037e902b2476e1d4c308a895cc3b936c5ee19b45361dc26c9631d29ae0",
      "timestamp": 1700059286,
      "l1origin": {
        "hash": "0x49ee7a7398bc5010b48de111fc0ebc99d63d38ac8233202c913646d901e15213",
        "number": 323353
      },
      "sequenceNumber": 2
    }
  }
}

You can compare the block height on your node with explorer (mainnet or testnet), use your RPC node only when it has caught up with the latest block height.

Sync Status of Base optimism Execution Node

You can check your status by connecting to geth console

docker exec -it  base-node-geth-1 geth attach http://localhost:8545
> eth.blockNumber
94078 # it will show you the latest block - number here is just an example

> eth.syncing
true

Configure vald

In order for vald to connect to your Base node, your rpc_addr should be exposed in vald’s config.toml

[[axelar_bridge_evm]]
name = "base"
rpc_addr = "http://IP:PORT"
start-with-bridge = true

[[axelar_bridge_evm]]
name = "base"
rpc_addr = "http://IP:PORT"
start-with-bridge = true

Edit this page